Accessory

::KBL::2_Parts::Accessory
Zubehör

Components which may be used with connectors to facilitate their use in a wide range of applications. Accessories perform no electrical function and include such items as caps, covers, gaskets washers and boots.

An Accessory is any supplementary portion of a connector with the obligation to help a Harness to perform its function.
Example: An Accessory may be a sleeve, a cap, a cable strap or comparable parts, which are installed to a plug.

Showing Diagrams: (02) Part specializations, (04) Part master data, (07) Part usage list (2), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Accessory_occurrence

::KBL::3_Part_structure::Accessory_occurrence
An Accessory_occurrence is the occurrence of an Accessory in a module part list.

Showing Diagrams: (03) Harness and Modules, (06) Part usage list (1), (07) Part usage list (2), (12) Topology and routing (1), (13) Topology and routing (2), (99) KBL - Gesamtmodell
Send comment

Alias_identification

::KBL::6_Foundation::Alias_identification
Alternative Identifikation

An Alias_identification is a mechanism to associate an object with an additional identifier that is used to identify the object of interest in a different context, either in another Organization, or in some other context. The scope of the Alias_identification shall be specified by the attributes 'Scope' and/or by the attribute 'Description'.

Showing Diagrams: (04) Part master data
Send comment

Approval

::KBL::6_Foundation::Approval
An Approval is a judgment concerning the quality of those modules or harnesses that are subject of the Approval. An Approval represents a statement made by technical personnel or management personnel whether certain requirements are met. The absence of approval information does not imply any approval status by default.

Showing Diagrams: (01) Common part attributes and properties, (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Assembly_part

::KBL::2_Parts::Assembly_part
Teilmontiertes Bauteil

An assembly of multiple parts identified by a common part number.

An Assembly_part is a component that contains other subordinate objects. An Assembly_part is ordered as a part to be bought under a part number, due to limited functionalities of the CAD systems these must be described however with several individual parts.

Showing Diagrams: (02) Part specializations, (04) Part master data, (06) Part usage list (1), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Assembly_part_occurrence

::KBL::3_Part_structure::Assembly_part_occurrence
An Assembly_part_occurrence is the occurrence of an Assembly_part in a module part list.

Showing Diagrams: (03) Harness and Modules, (06) Part usage list (1), (07) Part usage list (2), (08) Part usage list (3), (09) Part usage list (4), (10) Part usage list (5), (11) Part usage list (6), (12) Topology and routing (1), (99) KBL - Gesamtmodell
Send comment

B_spline_curve

::KBL::6_Foundation::B_spline_curve
A B-spline curve is a piecewise parametric polynomial or rational curve described in terms of control points and basis functions. The B-spline curve has been selected as the most stable format to represent all types of polynomial or rational parametric curves. With appropriate attribute values it is capable of representing single span or spline curves of explicit polynomial, rational, Bezier or B-spline type.
Within the Harness Engineering Information Model the definition has been restricted to a uniform B_spline_curve, where the knots are evenly spaced. Suitable default values for the knots and knot multiplicities are derived in this case. A B-spline is uniform if and only if all knots are of multiplicity 1 and they differ by a positive constant from the preceding knot. In this case the knot spacing is 1.0, starting at -d , where d is the degree.
Note: If the B-spline curve is uniform and degree=1, the B-spline is equivalent to a polyline.

Showing Diagrams: (12) Topology and routing (1), (15) Miscellaneous, (99) KBL - Gesamtmodell
Send comment

Cartesian_point

::KBL::6_Foundation::Cartesian_point
A Cartesian_point is a point that is defined by its coordinates in a rectangular Cartesian coordinate system.

Showing Diagrams: (12) Topology and routing (1), (15) Miscellaneous, (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Cavity

::KBL::2_Parts::Cavity
Kontaktkammer

A cavity is a defined space in a housing for location of an electrical terminal or cavity plug/seal (can be empty).

Showing Diagrams: (00) Connection Overview, (04) Part master data, (07) Part usage list (2), (99) KBL - Gesamtmodell
Send comment

Cavity_occurrence

::KBL::4_Connectivity::Cavity_occurrence
A Cavity_occurrence is the occurrence of a Cavity in the context of a connector_occurrence.

Showing Diagrams: (00) Connection Overview, (05) Connectivity, (07) Part usage list (2), (11) Part usage list (6), (99) KBL - Gesamtmodell
Send comment

Cavity_plug

::KBL::2_Parts::Cavity_plug
Blindstopfen

Connector accessory to fill and seal empty cavities

A Cavity_plug is a water tight non-electrical object to fill an empty cavity.

Showing Diagrams: (02) Part specializations, (04) Part master data, (10) Part usage list (5), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Cavity_plug_occurrence

::KBL::3_Part_structure::Cavity_plug_occurrence
A Cavity_plug_occurrence is the occurrence of a Cavity_plug in a module part list.
Note: Cavity_plugs do not show up in a module bill of material.

Showing Diagrams: (03) Harness and Modules, (05) Connectivity, (06) Part usage list (1), (07) Part usage list (2), (10) Part usage list (5), (99) KBL - Gesamtmodell
Send comment

Cavity_seal

::KBL::2_Parts::Cavity_seal
Kontaktkammerversiegelung

Connector accessory to fill and seal a populated cavity.

A Cavity_seal is a water tight non-electrical object to fill a populated Cavity.

Showing Diagrams: (02) Part specializations, (04) Part master data, (09) Part usage list (4), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Cavity_seal_occurrence

::KBL::3_Part_structure::Cavity_seal_occurrence
A Cavity_seal_occurrence is the occurrence of a Cavity_seal in a module.
Note: The number of occurrences used in a specific module or harness can be calculated by the individual occurrences.
Note: The usage of a Cavity_seal_occurrence for a particular Cavity is specified by the Part_usage object.

Showing Diagrams: (03) Harness and Modules, (06) Part usage list (1), (09) Part usage list (4), (10) Part usage list (5), (99) KBL - Gesamtmodell
Send comment

Change

::KBL::6_Foundation::Change
A Change is a mechanism to keep track of the change history. The set of changes assigned to a Part covers all modification numbers up to the last modification level of the version of the Part.

Showing Diagrams: (01) Common part attributes and properties, (99) KBL - Gesamtmodell
Send comment

Co_pack_occurrence

::KBL::3_Part_structure::Co_pack_occurrence
A Co_pack_occurrence is the occurrence of a Co_pack_part in a module part list.

Showing Diagrams: (03) Harness and Modules, (06) Part usage list (1), (09) Part usage list (4), (99) KBL - Gesamtmodell
Send comment

Co_pack_part

::KBL::2_Parts::Co_pack_part
Kabelbaumzubehör

A Co_pack_part is a Part which is supplied and installed with the wiring harness, but without any electrical connection.

Showing Diagrams: (02) Part specializations, (04) Part master data, (09) Part usage list (4), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Component

::KBL::2_Parts::Component
A Component is an object which belongs to the harness.
Example: Fuse, fusebox, relay sockets

Showing Diagrams: (02) Part specializations, (11) Part usage list (6), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Component_occurrence

::KBL::3_Part_structure::Component_occurrence
A Component_occurrence is the occurrence of a Component in a module part list.

Showing Diagrams: (03) Harness and Modules, (06) Part usage list (1), (11) Part usage list (6), (99) KBL - Gesamtmodell
Send comment

Connection

::KBL::4_Connectivity::Connection
Verbindung

A Connection is a mechanism to specify the electrical connectivity between two or more contact points.

Showing Diagrams: (00) Connection Overview, (03) Harness and Modules, (05) Connectivity, (12) Topology and routing (1), (99) KBL - Gesamtmodell
Send comment

Connection_or_occurrence

::KBL::1_Harness::Connection_or_occurrence
A Connection_or_occurrence is an object that is controlled by a Module or a Harness.

Showing Diagrams: (00) Connection Overview, (03) Harness and Modules, (06) Part usage list (1), (99) KBL - Gesamtmodell
Send comment

Connector_housing

::KBL::2_Parts::Connector_housing
Steckergehäuse

Body of the connector with 1-n cavities.

A Connector_housing is a non populated connector, i.e. without addressed/populated cavities.

A Connector_housing without any slot allows for the representation of a connector shell (Mehrfachstecker)

Showing Diagrams: (00) Connection Overview, (02) Part specializations, (04) Part master data, (07) Part usage list (2), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Connector_occurrence

::KBL::3_Part_structure::Connector_occurrence
Steckverbinder

A Connector_occurrence is the occurrence of a Connector_housing in a module part list.

Showing Diagrams: (00) Connection Overview, (03) Harness and Modules, (05) Connectivity, (06) Part usage list (1), (07) Part usage list (2), (11) Part usage list (6), (12) Topology and routing (1), (99) KBL - Gesamtmodell
Send comment

Connector_usage

::KBL::3_Part_structure::Connector_usage

Showing Diagrams: (07) Part usage list (2)
Send comment

Contact_point

::KBL::4_Connectivity::Contact_point
A Contact_point defines the positions where electrical connectivity takes place.

Showing Diagrams: (00) Connection Overview, (05) Connectivity, (99) KBL - Gesamtmodell
Send comment

Core

::KBL::2_Parts::Core
Kabelader

A core is part of a cable. A cable consists of 1-n cores

A Core is a single conductor of a multi-core wire including its isolation.

Showing Diagrams: (04) Part master data, (08) Part usage list (3), (99) KBL - Gesamtmodell
Send comment

Core_occurrence

::KBL::3_Part_structure::Core_occurrence
A Core_occurrence is the occurrence of a Core within a Special_wire_occurrence.

Showing Diagrams: (05) Connectivity, (08) Part usage list (3), (99) KBL - Gesamtmodell
Send comment

Creation

::KBL::6_Foundation::Creation
A Creation assigns creation information to a Module or Harness.

Showing Diagrams: (01) Common part attributes and properties, (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Cross_section_area

::KBL::6_Foundation::Cross_section_area
A Cross_section_area

Showing Diagrams: (12) Topology and routing (1), (99) KBL - Gesamtmodell
Send comment

Dimension_specification

::KBL::5_Topology::Dimension_specification
A Dimension_specification is the definition of the distance between two elements.

Showing Diagrams: (14) Dimensions, (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

External_reference

::KBL::6_Foundation::External_reference
An External_reference is a mechanism to provide information of the documents associated with the Part.
Example: 3D model, form board drawings, etc.

Showing Diagrams: (01) Common part attributes and properties, (05) Connectivity, (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Extremity

::KBL::4_Connectivity::Extremity
The Extremity specifies the Contact_point which is connected by a spcific Connection.

Showing Diagrams: (00) Connection Overview, (05) Connectivity
Send comment

Fixed_component

::KBL::5_Topology::Fixed_component
A Fixed_component is an object that can be assigned by a fixing.

Showing Diagrams: (13) Topology and routing (2), (99) KBL - Gesamtmodell
Send comment

Fixing

::KBL::2_Parts::Fixing
Kabelbefestigung

A Fixing is an accessory part of the harness, used to fix the position. Fixing elements cover all parts, that are used in cable section.
Example: clips, sleeves, cable ducts, grommet, etc.

Showing Diagrams: (02) Part specializations, (04) Part master data, (09) Part usage list (4), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Fixing_assignment

::KBL::5_Topology::Fixing_assignment
A Fixing_assignment assigns a Fixing_occurrence or an Accessory_occurrence to a Segment.

Showing Diagrams: (13) Topology and routing (2), (99) KBL - Gesamtmodell
Send comment

Fixing_occurrence

::KBL::3_Part_structure::Fixing_occurrence
A Fixing_occurrence is the occurrence of a Fixing in a module part list.

Showing Diagrams: (03) Harness and Modules, (06) Part usage list (1), (09) Part usage list (4), (12) Topology and routing (1), (13) Topology and routing (2), (99) KBL - Gesamtmodell
Send comment

General_terminal

::KBL::2_Parts::General_terminal
Kontakt

A General_terminal is a device designed to terminate a conductor to be affixed usually to a post, stud, chassis, or other conductor or the like in order to establish electrical connection.
Note: A General_terminal describes the active part of the connector, which connects electrical, equal to "contact".

Showing Diagrams: (00) Connection Overview, (02) Part specializations, (04) Part master data, (10) Part usage list (5), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

General_wire

::KBL::2_Parts::General_wire
A General_wire is a physical wire, performing electrical connection. A General_wire can either be used to define a single wire or a multi-core wire.

Showing Diagrams: (02) Part specializations, (04) Part master data, (08) Part usage list (3), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

General_wire_occurrence

::KBL::3_Part_structure::General_wire_occurrence
A General_wire_occurrence is the occurrence of a Wire_occurrence or a Special_wire_occurrence in a module part list.

Showing Diagrams: (03) Harness and Modules, (06) Part usage list (1), (08) Part usage list (3), (99) KBL - Gesamtmodell
Send comment

Harness

::KBL::1_Harness::Harness
Kabelbaum

All wires in the car need to connect the ECU's, sensors, switches, and actuators. The harness depends on the car configuration.

A Harness is an assembly of insulated conductors formed to a predetermined pattern or configuration.

Showing Diagrams: (00) Connection Overview, (01) Common part attributes and properties, (02) Part specializations, (03) Harness and Modules, (06) Part usage list (1), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Harness_configuration

::KBL::1_Harness::Harness_configuration
Kabelbaumvariante

A superset of all available functions (150%) is described in function diagram. The harness configuration describes the harness of useful car configurations.

A Harness_configuration is a variant of an harness.

Showing Diagrams: (01) Common part attributes and properties, (03) Harness and Modules, (99) KBL - Gesamtmodell
Send comment

Harness_content

::KBL::1_Harness::Harness_content

Showing Diagrams: (03) Harness and Modules
Send comment

Installation_instruction

::KBL::6_Foundation::Installation_instruction
An Installation_instruction is the description of the methods that can be used to install a Part.

Showing Diagrams: (05) Connectivity, (06) Part usage list (1), (99) KBL - Gesamtmodell
Send comment

KBL_container

::KBL::1_Harness::KBL_container
The KBL_container is introduced to specify the information which can be exchanged by one file.

Showing Diagrams: (16) KBL_Container
Send comment

Located_component

::KBL::5_Topology::Located_component
Positionierbare Komponenten der KBL: z.B. Connector_occurrence, Accessory_occurrence, Fixing_occurrence, ...
A Located_component is a component which can get a position in the topology by a node.

Showing Diagrams: (12) Topology and routing (1), (14) Dimensions, (99) KBL - Gesamtmodell
Send comment

Material

::KBL::6_Foundation::Material
A Material is the substance out of which a Part is or can be made.

Showing Diagrams: (01) Common part attributes and properties, (99) KBL - Gesamtmodell
Send comment

Module

::KBL::1_Harness::Module
A Module is a physical part of harness electrically defined by one or more module groups including required harness furniture.

Showing Diagrams: (00) Connection Overview, (01) Common part attributes and properties, (02) Part specializations, (03) Harness and Modules, (99) KBL - Gesamtmodell
Send comment

Module_configuration

::KBL::1_Harness::Module_configuration
A Module_configuration is a grouping of wires and components fulfilling a specific functionality of a harness.

Example:
Option: Audio System with CD Changer

Showing Diagrams: (00) Connection Overview, (03) Harness and Modules, (99) KBL - Gesamtmodell
Send comment

Module_configuration_type

::KBL::1_Harness::Module_configuration_type

Showing Diagrams: (03) Harness and Modules
Send comment

Module_content

::KBL::1_Harness::Module_content

Showing Diagrams: (03) Harness and Modules
Send comment

Module_family

::KBL::1_Harness::Module_family
Funktionsfamilie

Description of a set of modules.

A Module_family is a mechanism to group mutually exclusive modules.
EXAMPLE "audio equipment"

Showing Diagrams: (03) Harness and Modules, (99) KBL - Gesamtmodell
Send comment

Mounting_element

::KBL::3_Part_structure::Mounting_element
A Mounting_element is an object which is associated with a Component_occurrence.

Showing Diagrams: (11) Part usage list (6), (99) KBL - Gesamtmodell
Send comment

Node

::KBL::5_Topology::Node
A node forms begin and end of a Segment.

Showing Diagrams: (12) Topology and routing (1), (14) Dimensions, (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Numerical_value

::KBL::6_Foundation::Numerical_value
A Numerical_value is a quantity expressed with a numerical value and a unit.

Showing Diagrams: (15) Miscellaneous
Send comment

Part

::KBL::2_Parts::Part
Bauteil, Komponente

A part is an element of a product relevant for a bill-of material.

Showing Diagrams: (00) Connection Overview, (01) Common part attributes and properties, (02) Part specializations, (99) KBL - Gesamtmodell
Send comment

Part_substitution

::KBL::3_Part_structure::Part_substitution
Austauschbauteil

A Part_substitution is a mechanism that describes the replacement of a sealing plug with a terminal. Typically usage: an optional module is added to a harness and a common connector will be used.

Showing Diagrams: (10) Part usage list (5), (99) KBL - Gesamtmodell
Send comment

Part_usage_select

::KBL::3_Part_structure::Part_usage_select
A Part_usage is an object which replaces a Cavity_occurrence.

Showing Diagrams: (05) Connectivity, (10) Part usage list (5), (99) KBL - Gesamtmodell
Send comment

Part_with_title_block

::KBL::2_Parts::Part_with_title_block
A Part_with_title_block is a mechanism to assign additional information to a Harness, a Harness_configuration or a Module.

Showing Diagrams: (01) Common part attributes and properties, (02) Part specializations, (99) KBL - Gesamtmodell
Send comment

Placed_element

::KBL::5_Topology::Placed_element
A Placed_element is an element where a Dimension_specification can apply.

Showing Diagrams: (14) Dimensions, (99) KBL - Gesamtmodell
Send comment

Processing_instruction

::KBL::6_Foundation::Processing_instruction
A Processing_instruction is the description of the methods that can be used to process a Part.

Showing Diagrams: (01) Common part attributes and properties, (05) Connectivity, (12) Topology and routing (1), (13) Topology and routing (2), (99) KBL - Gesamtmodell
Send comment

Protection_area

::KBL::5_Topology::Protection_area
Schutzzone

A Protection_area is a a mechanism to describe the area on a Segment covered by a Wire_protection_occurrence. Some segments of a harness are crossing areas with critical conditions like higher temperatures, higher humidity, etc. To prevent the damage of the cable, protect shields are mounted for that segment.
Note: For each Segment covered by a particular Wire_protection_occurrence a separate Protection_area has to be instantiated.

Showing Diagrams: (13) Topology and routing (2), (99) KBL - Gesamtmodell
Send comment

Routing

::KBL::5_Topology::Routing
A Routing is a course taken to get from a starting point to a destination.

Showing Diagrams: (00) Connection Overview, (12) Topology and routing (1), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Segment

::KBL::5_Topology::Segment
Verbindungsabschnitt

A Segment is a section of a Connection where no intermediate electrical contacts appear. At the beginning and at the end the same wires go in and out. Cables and wires are divided in segments. Every segment has its conditions like length, temperature range, etc.

Showing Diagrams: (00) Connection Overview, (12) Topology and routing (1), (13) Topology and routing (2), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Segment_form

::KBL::5_Topology::Segment_form

Showing Diagrams: (12) Topology and routing (1), (99) KBL - Gesamtmodell
Send comment

SI_prefix

::KBL::6_Foundation::SI_prefix

Showing Diagrams: (15) Miscellaneous
Send comment

SI_unit_name

::KBL::6_Foundation::SI_unit_name

Showing Diagrams: (15) Miscellaneous
Send comment

Slot

::KBL::2_Parts::Slot
A Slot is a mechanism to group the Cavity objects of a Connector_housing.

Showing Diagrams: (00) Connection Overview, (04) Part master data, (07) Part usage list (2), (99) KBL - Gesamtmodell
Send comment

Slot_occurrence

::KBL::4_Connectivity::Slot_occurrence
A Slot_occurrence is the occurrence of a Slot in a module part list.

Showing Diagrams: (00) Connection Overview, (07) Part usage list (2), (11) Part usage list (6), (99) KBL - Gesamtmodell
Send comment

Special_terminal_occurrence

::KBL::3_Part_structure::Special_terminal_occurrence
A Special_terminal_occurrence is the occurrence of a General_terminal with an identifier in a module part list.

Showing Diagrams: (03) Harness and Modules, (06) Part usage list (1), (10) Part usage list (5), (12) Topology and routing (1), (99) KBL - Gesamtmodell
Send comment

Special_wire_occurrence

::KBL::3_Part_structure::Special_wire_occurrence
Mehrdrahtleitung

A Special_wire_occurrence is the occurrence of a multi-core wire in a module part list.

Showing Diagrams: (08) Part usage list (3), (99) KBL - Gesamtmodell
Send comment

Specified_accessory_occurrence

::KBL::3_Part_structure::Specified_accessory_occurrence
A Specified_ accessory _occurrence is the occurrence of a accessory_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (07) Part usage list (2), (99) KBL - Gesamtmodell
Send comment

Specified_cavity_plug_occurrence

::KBL::3_Part_structure::Specified_cavity_plug_occurrence
A Specified_ cavity _plug _occurrence is the occurrence of Cavity_plug_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (10) Part usage list (5), (99) KBL - Gesamtmodell
Send comment

Specified_cavity_seal_occurrence

::KBL::3_Part_structure::Specified_cavity_seal_occurrence
A Specified_ cavity_seal _occurrence is the occurrence of a Cavity_seal_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (09) Part usage list (4), (99) KBL - Gesamtmodell
Send comment

Specified_co_pack_occurrence

::KBL::3_Part_structure::Specified_co_pack_occurrence
A Specified_ co_pack _occurrence is the occurrence of a Co_pack_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (09) Part usage list (4), (99) KBL - Gesamtmodell
Send comment

Specified_component_occurrence

::KBL::3_Part_structure::Specified_component_occurrence
A Specified_component_occurrence is the occurrence of a Component within an Assembly_part_occurrence.

Showing Diagrams: (11) Part usage list (6)
Send comment

Specified_connector_occurrence

::KBL::3_Part_structure::Specified_connector_occurrence
A Specified_connector_occurrence is the occurrence of a Connector_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (07) Part usage list (2), (99) KBL - Gesamtmodell
Send comment

Specified_fixing_occurrence

::KBL::3_Part_structure::Specified_fixing_occurrence
A Specified_ fixing_occurrence is the occurrence of a Fixing_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (09) Part usage list (4), (99) KBL - Gesamtmodell
Send comment

Specified_special_terminal_occurrence

::KBL::3_Part_structure::Specified_special_terminal_occurrence
A Specified_ special_terminal _occurrence is the occurrence of a Special_terminal_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (10) Part usage list (5), (99) KBL - Gesamtmodell
Send comment

Specified_special_wire_occurrence

::KBL::3_Part_structure::Specified_special_wire_occurrence
A Specified_ special_wire _occurrence is the occurrence of a Special_wire_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (08) Part usage list (3), (99) KBL - Gesamtmodell
Send comment

Specified_terminal_occurrence

::KBL::3_Part_structure::Specified_terminal_occurrence
A Specified_ terminal _occurrence is the occurrence of a Terminal_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (10) Part usage list (5), (99) KBL - Gesamtmodell
Send comment

Specified_wire_occurrence

::KBL::3_Part_structure::Specified_wire_occurrence
A Specified_wire_occurrence is the occurrence of a Wire_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (08) Part usage list (3), (99) KBL - Gesamtmodell
Send comment

Specified_wire_protection_occurrence

::KBL::3_Part_structure::Specified_wire_protection_occurrence
A Specified_wire_protection_occurrence is the occurrence of a Wire_protection_occurrence within an Assembly_part_occurrence.

Showing Diagrams: (09) Part usage list (4), (99) KBL - Gesamtmodell
Send comment

Terminal_occurrence

::KBL::3_Part_structure::Terminal_occurrence
A Terminal_occurrence is the occurrence of a General_terminal in a module part list.
Note: The number of occurrences used in a specific module or harness can be calculated by the individual occurrences.
Note: The usage of a Terminal_occurrence for a particular Cavity is specified by the Part_usage object.

Showing Diagrams: (00) Connection Overview, (03) Harness and Modules, (06) Part usage list (1), (10) Part usage list (5), (99) KBL - Gesamtmodell
Send comment

Tolerance

::KBL::5_Topology::Tolerance
A Tolerance is the specification of the allowable range for a dimension.

Showing Diagrams: (14) Dimensions, (99) KBL - Gesamtmodell
Send comment

Transformation

::KBL::6_Foundation::Transformation
A Transformation is a geometric transformation composed of translation and rotation. Scaling is not included.

Showing Diagrams: (15) Miscellaneous, (99) KBL - Gesamtmodell
Send comment

Unit

::KBL::6_Foundation::Unit
A Unit is a quantity chosen as a standard in terms of which other quantities may be expressed.
Example: A unit of square milli metre is defined as a SI_unit with Si_unit_name "metre", Si_prefix "milli" and Si_dimension "square".

Showing Diagrams: (15) Miscellaneous, (16) KBL_Container
Send comment

Unit_dimension

::KBL::6_Foundation::Unit_dimension

Showing Diagrams: (15) Miscellaneous
Send comment

Value_determination

::KBL::6_Foundation::Value_determination

Showing Diagrams: (12) Topology and routing (1)
Send comment

Value_range

::KBL::6_Foundation::Value_range
A Value_range is a pair of numerical values representing the range in which the value shall lie.

Showing Diagrams: (15) Miscellaneous
Send comment

Value_with_unit

::KBL::6_Foundation::Value_with_unit
A Value_with_unit is either a single numerical measure, or a range of numerical measures with upper, lower, or upper and lower bounds.

Showing Diagrams: (15) Miscellaneous
Send comment

Wire_colour

::KBL::6_Foundation::Wire_colour
A Wire_colour is a mechanism to define a colour for a wire together with a description of the kind of the colour.

Showing Diagrams: (04) Part master data, (99) KBL - Gesamtmodell
Send comment

Wire_length

::KBL::6_Foundation::Wire_length
Kabellänge

A Wire_length is a mechanism to define a length for a wire together with a description of the kind of the length (e.g. for DMU, for manufacturing).

Showing Diagrams: (08) Part usage list (3), (99) KBL - Gesamtmodell
Send comment

Wire_occurrence

::KBL::3_Part_structure::Wire_occurrence
A Wire_occurrence is the occurrence of a single wire in a module part list.

Showing Diagrams: (05) Connectivity, (08) Part usage list (3), (99) KBL - Gesamtmodell
Send comment

Wire_or_core_occurrence

::KBL::4_Connectivity::Wire_or_core_occurrence
A Wire_or_core_occurrence is an occurrence of a single wire, a multi-core wire, or a individual core of a multi-core wire.

Showing Diagrams: (05) Connectivity, (99) KBL - Gesamtmodell
Send comment

Wire_protection

::KBL::2_Parts::Wire_protection
Kabelschutzmantel

A Wire_protection is a mechanism to describe harness wrappings, a shield to prevent the wire from damaging.. It covers all kinds of wrappings modeled by CAD systems.

Showing Diagrams: (02) Part specializations, (04) Part master data, (09) Part usage list (4), (16) KBL_Container, (99) KBL - Gesamtmodell
Send comment

Wire_protection_occurrence

::KBL::3_Part_structure::Wire_protection_occurrence
A Wire_protection_occurrence is the occurrence of a Wire_protection in a module part list.

Showing Diagrams: (03) Harness and Modules, (06) Part usage list (1), (09) Part usage list (4), (12) Topology and routing (1), (13) Topology and routing (2), (99) KBL - Gesamtmodell
Send comment

Wiring_group

::KBL::4_Connectivity::Wiring_group
A Wiring_goup is a mechanism to group wire or core occurrences together.
Example: Twisted pairs.

Showing Diagrams: (03) Harness and Modules, (05) Connectivity, (99) KBL - Gesamtmodell
Send comment